 | The boring machine MRK-750T is designed for drilling wells in the ground round I to IV category inclusive, for electric power pylons, bridges, crossings, fencing poles, as well as piling foundations of buildings and structures. The boring machine can re replacement drilling tool that will allow it to increase drilling to a depth of 9 meters. Using high throughput TT4M chassis enables the machine to operate in the challenging areas of extreme north. Technical Description The working mechanisms of boring machines are available at a special frame, which is mounted to the tractor beam. Rotation machine tool working on a tractor engine TT-4 through the box power, built-in tractor transmission. From boxes through cardan shaft power takeoff shaft rotation is transmitted at speeds in a box, with three transmission. In incorporating a transmission cardan shaft rotation is transmitted to the shaft, which is connected to the gearbox input shaft bend. The angular rotation gearbox passes through the vertical shaft on rotation, where torque is transmitted burilnomu tool. The rise, lowering the mast, feed screw - hydraulic. |
